Articles: personal-protective-equipment.
-
Personal Protective Equipment (PPE) is required to safely work with biological agents of bacterial (i.e. Mycobacterium tuberculosis) or viral origin (Ebola and SARS). COVID-19 pandemic especially has created unforeseen public health challenges including a global shortage of PPE needed for the safety of health care workers (HCWs). Although sufficient stocks of PPE are currently available, their critical shortage may develop soon due to increase in demand and depletion of existing supply lines. To empower our HCWs and ensure their continued protection, proactive measures are urgently required to develop procedures to safely decontaminate the PPEs to allow their "selective reuse" during contingency situations. ⋯ Our study, therefore, successfully establishes the utility of VHP to effectively disinfect PPE for a possible reuse as per the requirements. VHP treatment did not damage coveralls, cause physical deformity and also did not alter fabric architecture of melt blown layer. We observed that disinfection process was successful consistently and therefore believe that the VHP-based decontamination model will have a universal applicability and utility. This process can be easily and economically scaled up and can be instrumental in easing global PPE shortages in any biosafety facility or in health care settings during pandemic situation such as COVID-19.
-
The features of a gunshot injury arising in the presence of body armor on the injured person are considered. The purpose of the work is to reveal the mechanisms of damage formation during non-penetration of an armored composition, during its penetration, as well as during external or internal rebound. The characteristic of damages arising with this is given. ⋯ With through penetration of body armor, the severity and volume of gunshot damage increase due to the introduction of fragments of bullets, fragments of armored panels and pieces of equipment into the wound channel. Rebounding of elements of dismantled bullets from the outer or inner surface of the body armor can cause severe gunshot damage to both the wearer of body armor and other persons. Knowledge of the mechanisms of formation and morphological features of injuries that occur when using body armor are prerequisites for a full forensic medical assessment of the investigated incident.
-
As coronavirus disease (COVID-19) cases continue to increase in Africa, healthcare workers (HCWs) have a high risk of being infected and the risks may be higher among those who work closely with patients. The risks of HCW infections can be mitigated with adequate precautions within healthcare facilities, especially with the use of personal protective equipment (PPE). We highlight and contextualise the findings of a Cochrane review on the type of PPE that protects best, the best way to put PPE on (donning) or to remove PPE (doffing) and how to train HCWs to use PPE. ⋯ Of the 24 studies included in this review, none was conducted on the African continent. There is thus an urgent need for well conducted studies on the experiences of HCWs using full-body covering PPE within the African context. Such studies could lead to tailored interventions that will improve the proper use of PPE among HCWs.
-
Wearing face masks is highly recommended to prevent SARS-CoV-2 transmission in health care workers and for the general public. The demand for high quality face masks has seen an upsurge in the recent times, leading to exploration of alternative economic and easily available options, without compromising on the quality. Particle removal from air in terms of capture efficiency of the filter media or the face mask is a crucial parameter for testing and quality assurance. ⋯ We found that 60 GSM face mask had particle capture efficiency of 94% for total particles greater than 0.3 microns and this capture efficiency was maintained even after sterilisation with ETO and thermal treatment. The cost of producing these masks was 30 US cents/mask at our institute. Our study suggests that sterilization wrap material made of non-woven polypropylene spunbond-meltblown-spunbond (SMS) fibres could be an appropriate readily available inexpensive material for making face masks or N95 respirators.
-
The worldwide shortage of single-use N95 respirators and surgical masks due to the COVID-19 pandemic has forced many health care personnel to use their existing equipment for as long as possible. In many cases, workers cover respirators with available masks in an attempt to extend their effectiveness against the virus. Due to low mask supplies, many people instead are using face coverings improvised from common fabrics. ⋯ We show that silk is a hydrophobic barrier to droplets, can be more breathable than other fabrics that trap humidity, and are re-useable via cleaning. We suggest that silk can serve as an effective material for making hydrophobic barriers that protect respirators, and silk can now be tested under clinical conditions to verify its efficacy for this function. Although respirators are still the most appropriate form of protection, silk face coverings possess properties that make them capable of repelling droplets.