• Hai-Thien Phu, Yensil Park, Austin J Andrews, Ian Marabella, Asish Abraham, Reid Mimmack, Bernard A Olson, Jonathan Chaika, Eugene Floersch, Mojca Remskar, Janet R Hume, Gwenyth A Fischer, Kumar Belani, and Christopher J Hogan.
• University of Minnesota Medical School, Department of Pediatrics, Minneapolis, MN; University of Minnesota Medical School, Division of General Internal Medicine, Minneapolis, MN.
• Am J Infect Control. 2020 Oct 1; 48 (10): 1237-1243.

BackgroundTo mitigate potential exposure of healthcare workers (HCWs) to SARS-CoV-2 via aerosol routes, we have developed a portable hood which not only creates a barrier between HCW and patient, but also utilizes negative pressure with filtration of aerosols by a high-efficiency particulate air filter.Material And MethodsThe hood has iris-port openings for access to the patient, and an opening large enough for a patient's head and upper torso. The top of the hood is a high-efficiency particulate air filter connected to a blower to apply negative pressure. We determined the aerosol penetration from outside to inside in laboratory experiments.ResultsThe penetration of particles from within the hood to the breathing zones of HCWs outside the hood was near 10-4 (0.01%) in the 200-400 nm size range, and near 10-3 (0.1%) for smaller particles. Penetration values for particles in the 500 nm-5 μm range were below 10-2 (1%). Fluorometric analysis of deposited fluorescein particles on the personal protective equipment of an HCW revealed that negative pressure reduces particle deposition both outside and inside the hood.ConclusionsWe find that negative pressure hoods can be effective controls to mitigate aerosol exposure to HCWs, while simultaneously allowing access to patients.Copyright © 2020 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

27 keywords...

hide…