• Eur Spine J · Jun 2016

    Biomechanical comparison of transfacet screws to lateral mass screw-rod constructs in the lower cervical spine.

    • Jie Tong, Wei Ji, Ruozhou Zhou, Zhiping Huang, Sheting Liu, and Qingan Zhu.
    • Department of Spine Surgery, Nanfang Hospital, Southern Medical University, 1838 N. Guangzhou Ave, Guangzhou, 510515, Guangdong, People's Republic of China.
    • Eur Spine J. 2016 Jun 1; 25 (6): 1787-93.

    PurposeTransfacet screws have been used as an alternative posterior fixation in the cervical spine. There is lack of spinal stability of the transfacet screws either as stand-along constructs or combined with anterior plate. This study was designed to evaluate spinal stability of transfacet screws following posterior ligamentous injury and combined with anterior plate, respectively, and compare transfacet screws to lateral mass screw-rod constructs.MethodsFlexibility tests were conducted on eight cadaveric specimens in an intact and injury, and instrumented with the transfacet screw fixation and lateral mass screw-rod construct at C5-C7 levels either after section of the posterior ligamentous complex or combined with an anterior plate and a mesh cage for C6 corpectomy reconstruction. A pure moment of ±2.0 Nm was applied to the specimen in flexion-extension, lateral bending, and axial rotation. Ranges of motion (ROM) were calculated for the C5-C7 segment.ResultsROM with the transfacet screws was 22 % of intact in flexion-extension, 9 % in lateral bending and 11 % in axial rotation, while ROM with the lateral mass screw-rod construct was 9 % in flexion-extension, 8 % in lateral bending and 22 % in axial rotation. The only significant difference between two constructs was seen in flexion-extension (5.8 ± 4.2° vs. 2.4 ± 1.2°, P = 0.002). When combined with an anterior plate and mesh cage, the transfacet screw fixation reduced ROM to 3.0° in flexion-extension, 1.2° in lateral bending, and 1.1° in axial rotation, which was similar to the lateral mass screw-rod construct.ConclusionsThis study identified the transfacet screw fixation, as stand-alone posterior fixation, was equivalent to the lateral mass screw-rod constructs in axial rotation and lateral bending except in flexion-extension. When combined with an anterior plate, the transfacet screw fixation was similar to the lateral mass screw-rod construct in motion constraint. The results suggested the transfacet screw fixation a biomechanically effective way as supplementation of anterior fixation.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…