-
Comparative Study
Monitoring carbon dioxide in mechanically ventilated patients during hyperbaric treatment.
- Asger Bjerregård and Erik Jansen.
- Department of Anaesthesia, Centre for Head and Orthopaedics, Rigshospitalet Copenhagen University Hospital, Copenhagen, Denmark. asgerbg@gmail.com
- Diving Hyperb Med. 2012 Sep 1;42(3):134-6.
BackgroundMeasurement of the arterial carbon dioxide (P(a)CO(2)) is an established part of the monitoring of mechanically ventilated patients. Other ways to get information about carbon dioxide in the patient are measurement of end-tidal carbon dioxide (P(ET)CO(2)) and transcutaneous carbon dioxide (PTCCO2). Carbon dioxide in the blood and cerebral tissue has great influence on vasoactivity and thereby blood volume of the brain. We have found no studies on the correlation between P(ET)CO(2) or P(TC)CO(2), and P(a)CO(2) during hyperbaric oxygen therapy (HBOT).MethodWe studied 10 intubated and ventilatory stable patients during HBOT. End-tidal and transcutaneous measurements provided continuous data. Arterial blood samples were collected after reaching the operational pressure of 284 kPa (2.8 ATA) and analysed outside the chamber. A total of 17 paired samples of P(ET)CO(2), P(TC)CO(2) and P(a)CO(2) were obtained.ResultsThere was a good correlation between P(ET)CO(2) and P(a)CO(2) using linear regression (r(2) = 0.83). Bland-Altman analysis showed that P(ET)CO(2) on average was 2.22 kPa higher than P(a)CO(2) with limits of agreement (LoA) at ± 2.4 kPa. P(TC)CO(2), on average, was 2.16 kPa lower than P(a)CO(2) and the correlation using linear regression was poor (r(2) = 0.24). Bland-Altman analysis revealed LoA at ± 3.2 kPa.ConclusionDuring hyperbaric conditions we found that P(ET)CO(2) as opposed to P(TC)CO(2) offered the greater precision, but there was great variability among patients. Care must be taken when using P(ET)CO(2) or P(TC)CO(2) as an estimate of P(a)CO(2).
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:

- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.