• Alan H Daniels, David J Paller, Ross J Feller, Nikhil A Thakur, Alison M Biercevicz, Mark A Palumbo, Joseph J Crisco, and Ian A Madom.
• Department of Orthopaedics, Warren Alpert Medical School, Brown University, Providence, RI.
• Int J Spine Surg. 2012 Jan 1;6:190-4.

BackgroundThe biomechanical behavior of total disc replacement (TDR) and anterior cervical discectomy and fusion (ACDF) incomplex multiplanar motion is incompletely understood. The purpose of this study was to determine whether ACDF or TDR significantly affects in vitro kinematics through a range of complex, multiplanar motions.MethodsSeven human cervical spines from C4-7 were used for this study. Intact cervical motion segments with and without implanted TDR and ACDF were tested by use of unconstrained pure bending moment testing fixtures in 7 mechanical modes: axial rotation (AR); flexion/extension (FE); lateral bending (LB); combined FE and LB; combined FE and AR; combined LB and AR; and combined FE, LB, and AR. Statistical testing was performed to determine whether differences existed in range of motion (ROM) and stiffness among spinal segments and treatment groups for each mechanical test mode.ResultsACDF specimens showed increased stiffness compared with the intact and TDR specimens (P < .001); stiffness was not found to be different between TDR and intact specimens. ACDF specimens showed decreased ROM in all directions compared with TDR and intact specimens at the treated level. For the coupled motion test, including AR, LB, and FE, the cranial adjacent level (C4/C5) for the intact specimens (2.7°) showed significantly less motion compared with both the TDR (6.1°, P = .009) and ACDF (6.8°, P = .002) treatment groups about the LB axis. Testing of the C4/C5 and C6/C7 levels in all other test modes yielded no significant differences in ROM comparisons, although a trend toward increasing ROM in adjacent levels in ACDF specimens compared with intact and TDR specimens was observed.ConclusionsThis study compared multiplanar motion under load-displacement testing of subaxial cervical motion segments with and without implanted TDR and ACDF. We found a trend toward increased motion in adjacent levels in ACDF specimens compared with TDR specimens. Biomechanical multiplanar motion testing will be useful in the ongoing development and evaluation of spinal motion-preserving implants.

2 keywords...

hide…