• Pavel Barsa, Robert Frőhlich, Miroslav Šercl, Pavel Buchvald, and Petr Suchomel.
• Department of Neurosurgery, Regional Hospital of Liberec, Husova Str. 10, 460 63, Liberec I, Czech Republic. pavel.barsa@nemlib.cz.
• Eur Spine J. 2016 Jun 1; 25 (6): 1643-50.

PurposeInnovative intraoperative imaging modalities open new horizons to more precise image acquisition and possibly to better results of spinal navigation. Planning of screw entry points and trajectories in this prospective study had been based on intraoperative imaging obtained by a portable 32-slice CT scanner. The authors evaluated accuracy and safety of this novel approach in the initial series of 18 instrumented surgeries in anatomically complex segment of cervico-thoracic junction.MethodsWe report on the single-institution results of assessment of anatomical accuracy of C5-T3 pedicle screw insertion as well as its clinical safety. The evaluation of total radiation dose and of time demands was secondary endpoint of the study.ResultsOut of 129 pedicle screws inserted in the segment of C5-T3, only 5 screws (3.9 %) did not meet the criteria for correct implant positioning. These screw misplacements had not been complicated by neural, vascular or visceral injury and surgeon was not forced to change the position intraoperatively or during the postoperative period. Quality of intraoperative CT imaging sufficient for navigation was obtained at all spinal segments regardless of patient´s habitus, positioning or comorbidity. A higher radiation exposition of the patient and 27 min longer operative time are consequences of this technique.ConclusionsThe intraoperative portable CT scanner-based spinal navigation is a reliable and safe method of pedicle screw insertion in cervico-thoracic junction.

4 keywords...

hide…