• J Clin Monit · Mar 1997

    FIx controller: an instrument to automatically adjust inspired oxygen fraction using feedback control from a pulse oximeter.

    • D B Raemer, X B Ji, and G P Topulos.
    • Department of Anesthesia, Massachusetts General Hospital, Boston 02114, USA.
    • J Clin Monit. 1997 Mar 1;13(2):91-101.

    ObjectiveTo develop an instrument to help prevent pulmonary O2 toxicity, a syndrome that manifests itself in adult intensive care patients.MethodsWe designed, built, and tested a device that controls FIO2 exposure using oxygen saturation measured with a pulse oximeter (SpO2) in a negative feedback control system. A target SpO2 is designated by the clinician and the system adjusts the FIO2 from a mechanical ventilator so as to minimize the difference between the measured SpO2 and the target. Important elements of the system include a conservative artifact rejection algorithm, a gainscheduled sampled-data proportional-integral-derivative (PID) controller, and a safety system to prevent inspired mixtures with undesirably low FIO2 due to device failure.ResultsThe control system was tuned in a series of animal experiments. Acceptable clinical response of the system was obtained using a gain-scheduled controller algorithm whereby the gain of the proportional term of a PID controller was adjusted based on the error signal and measured minute ventilation. Also, the artifact rejection algorithm and safety systems were successfully tested using simulation.ConclusionsTesting the effectiveness of this instrument will require comparison with manual control of FIO2 in an appropriately designed trial.

      Pubmed     Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…