• Eur J Anaesthesiol · Mar 2000

    Case Reports

    Airway ignition during CO2 laser laryngeal surgery and high frequency jet ventilation.

    • P Santos, A Ayuso, M Luis, G Martínez, and X Sala.
    • Servicio de Anestesiología y Reanimación, Hospital Clìnic Universitari de Barcelona, Barcelona, Spain.
    • Eur J Anaesthesiol. 2000 Mar 1; 17 (3): 204-7.

    AbstractWe present a case of a patient submitted for extirpation of a neoplasm of the larynx, by means of carbon dioxide laser surgery. High frequency jet ventilation was applied by means of orotracheal intubation with two Teflon catheters, 2 mm in external diameter and 30 cm in length, attached with three equally placed strips of adhesive paper tape. One catheter was used to inject the jet volume and the other used to measure the airway pressure. The adhesive strips were moistened and FiO2 was lower than 50%. After 30 min using the laser, an airway fire was noticed. Ventilation was interrupted and the catheters were removed. The patient was reintubated with an endotracheal tube of 6 mm ID and the surgical procedure was continued until the tumour was removed. Two factors contributed to the airway fire: the ignition of the lowest adhesive strip that had dried and the use of the laser in the mode of continuous pulsation.

      Pubmed     Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…