• Respir Physiol Neurobiol · Apr 2005

    Comparative Study

    Oxygen consumption and PEEPe in ventilated COPD patients.

    • J-Ch Glérant, O Leleu, D Rose, I Mayeux, and V Jounieaux.
    • Respiratory Department and Intensive Care Unit, 80054 Amiens Cedex 1, France.
    • Respir Physiol Neurobiol. 2005 Apr 15; 146 (2-3): 117-24.

    AbstractThe intrinsic positive-end-expiratory pressure (PEEPi) increases the inspiratory load, the cost of breathing and thus oxygen consumption (V(O2)). It has been shown that applying an extrinsic positive-end-expiratory pressure (PEEPe) reduces the inspiratory threshold load but the optimal PEEPe level is still in debate. We hypothesize that the best level of PEEPe could induce a decrease in V(O2) by reducing the V(O2) demands from PEEPi. Nine mechanically ventilated COPD patients were included. The level of PEEPe was determined in accordance with the static PEEPi. V(O2) was measured using an automatic gas analyser during synchronized intermittent mandatory ventilation (SIMV): without PEEPe, with a PEEPe equal to 50% of static PEEPi and with a PEEPe equal to 100% of static PEEPi. Static PEEPi appeared to be significantly correlated with the degree of airflow obstruction (FEV1) (P<0.05). Applying a PEEPe equal to static PEEPi resulted in a significant decrease in V(O2) (P<0.05) whereas the change in V(O2) proved to be unpredictable for a PEEPe level of 50% of static PEEPi. In conclusion, V(O2) decreases progressively when increasing PEEPe up to a level equal to 100% of static PEEPi. Thus, in mechanically ventilated COPD patients with a FEV1 < or = 1000 ml, applying a PEEPe of 5 cmH2O should be recommended.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…