Articles: personal-protective-equipment.
-
The high demand for personal protective equipment during the novel coronavirus outbreak has prompted the need to develop strategies to conserve supply. Little is known regarding decontamination interventions to allow for surgical mask reuse. ⋯ There is limited evidence on the safety or efficacy of surgical mask decontamination. Given the heterogeneous methods used in studies to date, we are unable to draw conclusions on the most efficacious and safe intervention for decontaminating surgical masks.
-
Randomized Controlled Trial
The impact of respiratory protective equipment on difficult airway management: a randomised, crossover, simulation study.
The current international COVID-19 health crisis underlines the importance of adequate and suitable personal protective equipment for clinical staff during acute airway management. This study compares the impacts of standard air-purifying respirators and powered air-purifying respirators during simulated difficult airway scenarios. Twenty-five anaesthetists carried out four different standardised difficult intubation drills, either unprotected (control), or wearing a standard or a powered respirator. ⋯ Videolaryngoscopy allowed the shortest intubation times regardless of the respiratory protective device used. Anaesthetists rated heat and vision significantly higher in the powered respirator group; however, noise levels were perceived to be significantly lower than in the standard respirator group. We conclude that standard and powered respirators do not significantly prolong simulated advanced intubation procedures.
-
Rev Esp Anestesiol Reanim · Oct 2020
Role of 3D printing for the protection of surgical and critical care professionals in the COVID-19 pandemic.
There is a shortage of supplies for the protection of professionals during the COVID-19 pandemic. 3D printing offers the possibility to compensate for the production of some of the equipment needed. The objective is to describe the role of 3D printing in a health service during the COVID-19 pandemic, with an emphasis on the process to develop a final product ready to be implemented in the clinical environment. ⋯ 3D printing is a valid resource for the production of protective material for professionals whose supply is reduced during a pandemic.
-
Int. J. Clin. Pract. · Oct 2020
ReviewThe covid-19 pandemic, personal protective equipment, and respirator: a narrative review.
The coronavirus disease 2019 pandemic has touched almost every continent. Personal protective equipment (PPE) is the final line of protection of healthcare workers (HCW). There is variation as well as controversy of infection control recommendation with regards to the use of PPE for HCW between institutions. The aim of this narrative review is to of examine and summarise the available evidence to guide recommendation for the safety of HCW. ⋯ Transmission of viruses is multimodal and in the setting of a novel pathogen with high case fatality with no proven effective interventions, PPE that affords the best protection should be available to HCWs.