• Matthias Trost, Werner Schmoelz, Doris Wimmer, Romed Hörmann, Sönke Frey, and Tobias Ludger Schulte.
• Department of Orthopaedics and Traumatology, St. Josef-Hospital, Ruhr University Bochum, Bochum, Germany.
• Arch Orthop Trauma Surg. 2020 Oct 1; 140 (10): 1395-1401.

PurposeThe aim of this study was to assess the biomechanical properties of intact vertebra augmented using a local osteo-enhancement procedure to inject a triphasic calcium sulfate/calcium phosphate implant material.MethodsTwenty-one fresh frozen human cadaver vertebra (Th11-L2) were randomized into three groups: treatment, sham, and control (n = 7 each). Treatment included vertebral body access, saline lavage to displace soft tissue and marrow elements, and injection of the implant material to fill approximately 20% of the vertebral body by volume. The sham group included all treatment steps, but without injection of the implant material. The control group consisted of untreated intact osteoporotic vertebra. Load at failure and displacement at failure for each of the three groups were measured in axial compression loading.ResultsThe mean failure load of treated vertebra (4118 N) was significantly higher than either control (2841 N) or sham (2186 N) vertebra (p < 0.05 for: treatment vs. control, treatment vs. sham). Treated vertebra (1.11 mm) showed a significantly higher mean displacement at failure than sham vertebra (0.80 mm) (p < 0.05 for: treatment vs. sham). In the control group, the mean displacement at failure was 0.99 mm.ConclusionsThis biomechanical study shows that a local osteo-enhancement procedure using a triphasic implant material significantly increases the load at failure and displacement at failure in cadaveric osteoporotic vertebra.

17 keywords...

hide…